JACK UP BARGE
1.G.T: 405tons
2.LxBxD: 35x20x3.4m(Center Open 12.9x6.6x3.4m)
3.M/E:ISUZU120 GA-S-6CYL 150ps x 2sets 125kva
4.A/E:ISUZU C-221-4CYL800rpm x 1set 220v x 15kva
5.Type: Kawasaki ¨CIHC-Gusto Type
6.Capacity
-.Jacking: 1,240tons
-.Holding: 2,100tons
-.Crane: P&H 70tons
-.Spud Length: 43.5m
7.Built: Jan 1974 in Japan (Kawasaki Heavy Co.,Ltd.)
8.Winch: 8T x 6m/min x 4sets
9.Anchor: 3.5T x 4sets
11. Inspection : Korea
Jack-up barge's accommodation is as following.=
Cabin for 2 people : 1 Cabin
for 4 people : 1Cabin
for 8 people : 2
Total berth : 22
**************************
(FREE TRANSLATION)
MAJOR ITEMS OF JACKING SYSTEM
1.DRIVEN PART OF JACKING DEVICE
NUMBER OF DEVICE: 4 SET
TYPE: KAWASAKI-IHC-GUSTO JACKING DEVICE
AVILITY OF JACKING CAPACITY: 310 TONS PER EACH LEG
PRE-READYING AVILITY: 530 TONS PER LEG
SPEED OF JACK-UP:-
- Pontoon up: about 15m/hr
- Pontoon down: about 13m/hr
- Leg up: about 26m/hr
- Leg down: about 32m/hr
2. HYDRAULIC UNIT
NUMBER OF UNIT: 1 UNIT
TYPE: ELETRO ACCELERATE PISTON TYPE
OUTPUT OF ELETRICK MOTOR: 45 KW
2-1. HYDRAULIC PUMP(HIGH PRESSURE)
NUMBER: 1 SET
TYPE: ELETRO ACCELERATE PISTON TYPE
TITLE: BZ720
PRESSURE OF DISCHARGING: 230 KG/CM2
QUANTITY OF DISCHARGING: 65LITER PER MIN
RPM: 1,750 RPM
2-2. HYDRAULIC PUMP(LOW PRESSURE)
NUMBER: 1 UNIT
TYPE: ELETRO-GEAR TYPE
TITLE: P380
PRESSURE OF DISCHARGING: 110 KG/CM2
QUANTITY OF DISCHARGING: 125 LITER PER MIN.
RPM: 1,750 RPM
2-3. HYDRAULIC PUMP(PILOT AND BOOSTER)
NUMBER: 1 UNIT
TYPE: ELETRO-GEAR TYPE
TITLE: P206
PRESSURE OF DISCHARGING: 70 KG/CM2(MAX)
QUANTITY OF DISCHARGING: 9.5 LITER PER MIN.
RPM: 1,750 RPM
2-4. ELETRO MOTOR FOR HYDRAULIC PUMP
NUMBER: 1 UNIT
TYPE: WATERTIGHT TRANSVERSE TYPE OF BOTH SHAFT
OUTPUT: 45 KW
RPM: 1,750 RPM
POWER SOURCE: AC22V 60HZ 3P
CURRENCY: CONTINUOUS
2-5. OIL TANK
NUMBER: 1 UNIT
TYPE: HEAD TANK
CAPACITY: 700 LITER
2-6. OIL COOLER
NUMBER: 1 UNIT
TYPE: TRANSVERSE WATER PIPE TYPE
CAPACITY OF COOLING: 1 M2
3. HYDRAULIC CYLINER
3-1. WORKING HYDRAULIC CYLINDER
NUMBER: 8 SETS
TYPE: CLEVIS TYPE
DIAMETER OF CYLINDER: 375 MM
DIAMETER OF PISTON ROD: 200 MM
STROKE: 2000 + 200 MM
MAXIMUM WORKING PRESSURE: 230 KG/CM2
3-2. HOLDING HYDRAULIC CYLINDER
NUMBER: 8 SETS
TYPE: CLEVIS TYPE
DIAMETER OF CYLINDER: 375 MM
DIAMETER OF PISTON ROD: 200 MM
STROKE: 1000 + 150 MM
MAXIMUM WORKING PRESSURE: 230 KG/CM2
3-3. CATCH DRIVEN HYDRAULIC CYLINDER
NUMBER: 32 SETS
TYPE: CLEVIS TYPE
DIAMETER OF CYLINDER: 50 MM
DIAMETER OF PISTON ROD: 28 MM
STROKE: 250 MM
MAXIMUM WORKING PRESSURE: 70 KG/CM2
4. CONTROL PANEL
4-1. CONTROL PANEL AT
THE SITE OF EQUIPMENT
NUMBER: 4 SETS
TYPE: FITTING ON DECK WALL
4-2. CENTRAL CONTROL PANEL
NUMBER: 1 SET
TYPE: FITTING ON THE CONTROL DESK
Price: USD 2.6M
